Connectivity and Power Supply ======================================== Hardware Setup --------------------------------- This page will provide instructions on how to connect your DaoAI camera to be used with DaoAI Camera Studio. To set up the camera, plug in the power cable and connect it to your machine that has Camera Studio installed via USB (Or Ethernet for remote controlled cameras) Connectors --------------------------------- .. tabs:: .. group-tab:: BP SMALL .. image:: images/small.png :align: center A. Power Connector 24V, 10A DC B. Ethernet Connector CAT 6 or higher .. group-tab:: BP MEDIUM .. image:: images/medium.png :align: center A. Power Connector 24V, 10A DC B. Ethernet Connector CAT 6 or higher .. group-tab:: BP LARGE .. image:: images/large.png :align: center A. Ethernet Connector CAT 6 or higher B. Power Connector 24V, 15A DC .. group-tab:: BP AMR .. image:: images/amr.png :align: center A. Power Connector 24V, 10A DC B. Ethernet Connector CAT 6 or higher .. group-tab:: BP AMR-GPU .. image:: images/amr_gpu.png :align: center A. Power Connector 24V, 10A DC B. Ethernet Connector CAT 6 or higher .. group-tab:: BP LASER .. image:: images/laser.png :align: center A. Power Connector 24V, 15A DC B. Ethernet Connector CAT 6 or higher Power supply interface ^^^^^^^^^^^^^^^^^^^^^^^ .. tabs:: .. group-tab:: BP SMALL +-----------------------+--------+------------------------------+ | Pinout | Pin | Purpose | +=======================+========+==============================+ | | 1 | DC24V | | +--------+------------------------------+ |.. image:: images/2.png| 2 | GND | | :align: center +--------+------------------------------+ | | 3 | Reserved, do not connect | +-----------------------+--------+------------------------------+ .. group-tab:: BP MEDIUM +-----------------------+--------+------------------------------+ | Pinout | Pin | Purpose | +=======================+========+==============================+ | | 1 | DC24V | | +--------+------------------------------+ |.. image:: images/1.png| 2 | GND | | :align: center +--------+------------------------------+ | | 3 | Reserved, do not connect | | +--------+------------------------------+ | | 4 | Reserved, do not connect | | +--------+------------------------------+ | | 5 | Reserved, do not connect | | +--------+------------------------------+ | | 6 | Reserved, do not connect | +-----------------------+--------+------------------------------+ .. group-tab:: BP LARGE +-----------------------+--------+------------------------------+ | Pinout | Pin | Purpose | +=======================+========+==============================+ | | 1 | DC24V | | +--------+------------------------------+ |.. image:: images/1.png| 2 | GND | | :align: center +--------+------------------------------+ | | 3 | Reserved, do not connect | | +--------+------------------------------+ | | 4 | Reserved, do not connect | | +--------+------------------------------+ | | 5 | Reserved, do not connect | | +--------+------------------------------+ | | 6 | Reserved, do not connect | +-----------------------+--------+------------------------------+ .. group-tab:: BP AMR +-----------------------+--------+------------------------------+ | Pinout | Pin | Purpose | +=======================+========+==============================+ | | 1 | DC24V | | +--------+------------------------------+ |.. image:: images/2.png| 2 | GND | | :align: center +--------+------------------------------+ | | 3 | Reserved, do not connect | +-----------------------+--------+------------------------------+ .. group-tab:: BP AMR-GPU +-----------------------+--------+------------------------------+ | Pinout | Pin | Purpose | +=======================+========+==============================+ | | 1 | DC24V | | +--------+------------------------------+ |.. image:: images/2.png| 2 | GND | | :align: center +--------+------------------------------+ | | 3 | Reserved, do not connect | +-----------------------+--------+------------------------------+ .. group-tab:: BP LASER +-----------------------+--------+------------------------------+ | Pinout | Pin | Purpose | +=======================+========+==============================+ | | 1 | DC24V | | +--------+------------------------------+ |.. image:: images/2.png| 2 | GND | | :align: center +--------+------------------------------+ | | 3 | Reserved, do not connect | +-----------------------+--------+------------------------------+ Data cable ^^^^^^^^^^^^^^^^^^^^^^^ .. tabs:: .. group-tab:: BP SMALL BP Small use a ethernet cable for data transmission. The table below provides the ethernet cable pinout. .. image:: images/ethernet.png :align: center .. group-tab:: BP MEDIUM BP Medium use a ethernet cable for data transmission. The table below provides the ethernet cable pinout. .. image:: images/ethernet.png :align: center .. group-tab:: BP LARGE BP Large use a ethernet cable for data transmission. The table below provides the ethernet cable pinout. .. image:: images/ethernet.png :align: center .. group-tab:: BP AMR BP AMR use a ethernet cable for data transmission. The table below provides the ethernet cable pinout. .. image:: images/ethernet.png :align: center .. group-tab:: BP AMR-GPU BP AMR-GPU use a ethernet cable for data transmission. The table below provides the ethernet cable pinout. .. image:: images/ethernet.png :align: center .. group-tab:: BP LASER BP Laser use a ethernet cable for data transmission. The table below provides the ethernet cable pinout. .. image:: images/ethernet.png :align: center Connecting to the computer ----------------------------------- .. tabs:: .. group-tab:: BP SMALL 1. Plug the power supply first into the "24V " 2. Plug the ethernet cable into the camera and connect it to your computer 3. Plug the power supply into a power outlet. .. note:: On disconnect, follow the procedure in reverse, disconnect mains power first. |br| Ensure that all connections are screwed in tightly. |br| Check :ref:`System Requirements` for performance considerations Use the AC/DC adapter supplied with the unit to ensure compliance with emission and immunity standards. The DaoAI BP Small camera uses Ethernet communication and needs 1 Gbps for performance. Network Topology The DaoAI BP Small camera supports the following network topologies: .. list-table:: :widths: 25 :header-rows: 1 * - Direct connection * - .. image:: images/amrc.png Continue to :ref:`Software Installation` where you will also find Network Configuration. .. group-tab:: BP MEDIUM 1. Plug the power supply first into the "24V" 2. Plug the ethernet cable into the camera and connect it to your computer 3. Plug the power supply into a power outlet. .. note:: On disconnect, follow the procedure in reverse, disconnect mains power first. |br| Ensure that all connections are screwed in tightly. |br| Check :ref:`System Requirements` for performance considerations Use the AC/DC adapter supplied with the unit to ensure compliance with emission and immunity standards. The DaoAI BP Medium camera uses Ethernet communication and needs 1 Gbps for performance. Network Topology The DaoAI BP Medium camera supports the following network topologies: .. list-table:: :widths: 25 :header-rows: 1 * - Direct connection * - .. image:: images/mediumc.png Continue to :ref:`Software Installation` where you will also find Network Configuration. .. group-tab:: BP LARGE 1. Plug the power supply first into the "24V" 2. Plug the ethernet cable into the camera and connect it to your computer 3. Plug the power supply into a power outlet. .. note:: On disconnect, follow the procedure in reverse, disconnect mains power first. |br| Ensure that all connections are screwed in tightly. |br| Check :ref:`System Requirements` for performance considerations Use the AC/DC adapter supplied with the unit to ensure compliance with emission and immunity standards. The DaoAI BP LARGE camera uses Ethernet communication and needs 1 Gbps for performance. Network Topology The DaoAI BP large camera supports the following network topologies: .. list-table:: :widths: 25 :header-rows: 1 * - Direct connection * - .. image:: images/largec.png Continue to :ref:`Software Installation` where you will also find Network Configuration. .. group-tab:: BP AMR 1. Plug the power supply first into the "24V" 2. Plug the ethernet cable into the camera and connect it to your computer 3. Plug the power supply into a power outlet. .. note:: On disconnect, follow the procedure in reverse, disconnect mains power first. |br| Ensure that all connections are screwed in tightly. |br| Check :ref:`System Requirements` for performance considerations Use the AC/DC adapter supplied with the unit to ensure compliance with emission and immunity standards. The DaoAI BP AMR camera uses Ethernet communication and needs 1 Gbps for performance. Network Topology The DaoAI BP AMR camera supports the following network topologies: .. list-table:: :widths: 25 :header-rows: 1 * - Direct connection * - .. image:: images/amrc.png Continue to :ref:`Software Installation` where you will also find Network Configuration. .. group-tab:: BP AMR-GPU 1. Plug the power supply first into the "24V" 2. Plug the ethernet cable into the camera and connect it to your computer 3. Plug the power supply into a power outlet. .. note:: On disconnect, follow the procedure in reverse, disconnect mains power first. |br| Ensure that all connections are screwed in tightly. |br| Check :ref:`System Requirements` for performance considerations Use the AC/DC adapter supplied with the unit to ensure compliance with emission and immunity standards. The DaoAI BP AMR camera uses Ethernet communication and needs 1 Gbps for performance. Network Topology The DaoAI BP AMR-GPU camera supports the following network topologies: .. list-table:: :widths: 25 :header-rows: 1 * - Direct connection * - .. image:: images/amrc.png Continue to :ref:`Software Installation` where you will also find Network Configuration. .. group-tab:: BP LASER 1. Plug the power supply first into the "24V" 2. Plug the ethernet cable into the camera and connect it to your computer 3. Plug the power supply into a power outlet. .. note:: On disconnect, follow the procedure in reverse, disconnect mains power first. |br| Ensure that all connections are screwed in tightly. |br| Check :ref:`System Requirements` for performance considerations Use the AC/DC adapter supplied with the unit to ensure compliance with emission and immunity standards. The DaoAI BP LASER camera uses Ethernet communication and needs 1 Gbps for performance. Network Topology The DaoAI BP laser camera supports the following network topologies: .. list-table:: :widths: 25 :header-rows: 1 * - Direct connection * - .. image:: images/largec.png Continue to :ref:`Software Installation` where you will also find Network Configuration. .. |br| raw:: html